RSS

Distortion pedals

22 Oct

It’s been ages since I owned a proper distortion pedal. Other than a one-night stand with the Vox Satchurator about 10 years ago, I think you have to go back all the way to 1997, when I sold my Boss Metal Zone. During the years, I’ve owned several overdrives, but that’s not the same thing. When I say distortion, I’m talking about a pedal that has enough dirt that you can put it on top of a really clean tone and get a chugging heavy metal-type rhythm sound. An overdrive for me is something you put over a tone that is already distorted, either just to add more filth and sustain, or to change the EQ curve somewhat, or maybe a little bit of both. For many years, I’ve been sticking to the principle that the best clean sounds are actually a tiny bit distorted, so maybe I’ll stretch my definition of an overdrive to something that can help a clean tone acquire some glow, compression and sustain. The gist of the matter is that when I want a distorted tone for metal rhythm and leads, no pedal comes close to the sound of an amp. It is a pity, because I totally see the utility of a distortion pedal. Indeed, that was actually why I bought the Metal Zone all the way back in 1994. I had a series of sessions coming up, and I knew it was not going to be a practical option to schlep my Marshall stack all over town. I wanted a pedal where I could get my sound no matter what I plugged into. Another advantage with a distortion pedal is that it can simplify your signal chain. When I had my Marshall rack between 2006 and 2011, there were six long cables littering the floor underneath my feet: amp channel selector, guitar to pedalboard, pedalboard to amp, effects send to pedalboard, pedalboard to effects return and finally the AC cable for my pedal power supply. If there were a distortion unit that could have replaced the amp distortion, I could have done away with two of those cables straight away, since I would have put my chorus and delay directly after the distortion pedal. But the Satchurator never worked in my rig, quite likely because it was made to juice up a tube amp and not my transistor-based setup, so back it went on the next day. I was set on the Boss DS-2 Turbo Distortion on the strength of a number of impressive demo videos and sound clips, and would probably have bought one had Guitar Center in Tonawanda kept one in stock. But when I got back to Sweden, I had the opportunity to try one, and it failed the critical A/B test against the amp I ran it through. It is a good distortion pedal, but it couldn’t even best a Peavey!

The Boss MT-2 Metal Zone has an undeservedly bad reputation. Of course everyone is entitled to an opinion, but I get the feeling that what everyone is sneering at isn’t necessarily the sound of the pedal, but the way other people use it. Granted, it is possible to dial in some really sick and completely unusable sounds on the thing, and I’ll be first in line to admit that I’ve also been there and done that. But when its knobs are twiddled in moderation, it is actually a fairly good distortion pedal. I’ve even used it on a recording with my old pop/punk band, I seem to remember running it through one of those old Music Man combos, and got a fairly mellow crunch sound. I did a big Boss distortion pedal shootout back in 2008 or 2009 at a Guitar Center, where they have one of those big boards with every current Boss pedal, and the Metal Zone was easily the best of the bunch. There is just something with that smooth, fine-grained distortion that appeals to me, it comes closest to my ideal guitar tone. I didn’t have the opportunity to compare it to the DS-2 since they didn’t have one at all (it came up as discontinued in their computer system), but I gravitated toward the DS-2 mostly because I had already owned an MT-2 and besides I liked the idea of a footswitchable boost on the DS-2. Even now I find myself drawn to the Metal Zone, I’ll probably pick up a used one in the foreseeable future, for fun and nostalgia and to prove to myself that you actually can get usable tones out of if you’re careful.

I’m currently GAS-ing over a whole bunch of distortion pedals, and I owe myself a long session at various music stores to actually try them out through various amps. I want to compare the JHS Angry Charlie and Charlie Brown, toss in a Fulltone OCD, I am curious about the Boss BD-2 Blues Driver, not to mention the Angry Driver. I want to bring along my collection of fuzzes and overdrives, because I want to know how either distortion pedal reacts to my Mini Tube Screamer, Spark Booster and Soul Food, and while I’m at it, I want to find an amp that not only takes all these pedals well, but also gives me usable tones with my Fuzz Face and Nano Big Muff. This is a solution without a problem, because for my only real band, Namlar, I have an amp that I love to death, and for my home studio, I have a cornucopia of modelling amps, pedals and even plugins. What I find myself worrying and fussing over is what to get to play covers and sessions, which simply is not an issue anymore. I quit the party band four years ago and haven’t got the slightest inclination to rejoin. I haven’t played a session since before that, and if I recall correctly, I used my Blackstar ID:30 for that session with great results. When I analyze the situation I realize that this is in fact a manifestation of my constant itch to get back on the stage, and of course I would by lying if I didn’t also admit that I just love buying gear.

Advertisements
 
Leave a comment

Posted by on 22 October, 2017 in editorial, gear

 

Tags: ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: